Spring til hovedindhold (tryk på Enter)


Varenr. FIT0409

1.75mm PLA (750g) - White


På fjernlager Bestil før Onsdag kl 20 og varen afsendes ugen efter

Køb flere og spar:

160,00 DKK pr. stk. -
142,00 DKK pr. stk.
Spar 11%
125,00 DKK pr. stk.
Spar 22%

This item is only sold in badges of .


Du skal vælge en variant.
Minimumsmængde nået.
Maksimal mængde nået
  • Fri fragt ved køb over 999 kr

    Til pakkeshop i DK Læs mere.

  • 60 dages returret

    Se venligst Handelsbetingelser Læs mere.

  • Danmarks største udvalg

    Over 4000 produktnumre Læs mere.


This is 1.75mm PLA filament which is commonly used by reprap, Makerbot, Mendel, Huxley UP! Printer, WeisTek and Thing-o-matic  3D printers. It comes with one spool that can be easily attached on 3D printer.

PLA is a wonderful filament. It is the most environmentally friendly material available for this type of 3D printing, and it comes in a wide range of colors. 
Polylactic acid or polylactide (PLA) is a thermoplastic aliphatic polyester derived from renewable resources, such as corn starch ,tapioca roots, chips or starch, or sugarcane. It can biodegrade under certain conditions. 

As the extrusion head temperature will vary from 3D printer to 3D printer design, temperature differences will affect the result of your print, we suggest PLA use an optimal temperature range of 185℃ to 200℃. Please make the appropriate adjustments to temperature before you print with PLA, some testing might be required to find your optimal print settings.


  • Tensile Strength@Yield           46Mpa
  • Tensile Elongation@Break          20%
  • Flexural Strength                 70Mpa
  • Flexural Modulus                  3212Mpa
  • Notched lzod lmpact(23℃)         5.2kj/㎡
  • HDT@66psi                         58℃
  • density                           1.31g/cm3
  • MFR                               10-14g/10min
  • Accuracy                      1.75±0.1mm 
  • Weight                            750g

Shipping List

  • 1.75mm PLA (750g) - White x1

Relaterede varer