Spring til hovedindhold (tryk på Enter)

Devantech

Varenr. DFR0146

8 Channel Relay Module (RJ45-RLY16, Up to 16Amp)

1.021,25
DKK

På fjernlager Bestil før Onsdag kl 20 og varen afsendes ugen efter

Køb flere og spar:

1.021,25 DKK pr. stk. -
984,00 DKK pr. stk.
Spar 4%
947,00 DKK pr. stk.
Spar 7%

This item is only sold in badges of .

eller

Du skal vælge en variant.
Minimumsmængde nået.
Maksimal mængde nået
  • Fri fragt ved køb over 999 kr

    Til pakkeshop i DK Læs mere.

  • 60 dages returret

    Se venligst Handelsbetingelser Læs mere.

  • Danmarks største udvalg

    Over 4000 produktnumre Læs mere.

Documents

Full ETH008 Documentation 


Examples:

  • Java - command line application for controlling the module
  • Perl - Simple example of setting an output active/inactive by tcp
  • PHP script - Simple example of setting an output active/inactive by tcp
  • Python - command line application for controlling the module
  • Visual Basic - source code for simple program, includes UDP scan to determine any boards connected to the local network
  • Visual C# - source code for simple program, includes UDP scan to determine any boards connected to the local network

  • Introduction

    The ETH008 provides eight volt free contact relay outputs with a current rating of up to 16Am. The module is powered from a 12vdc supply which can be regulated or unregulated. The DC input jack is 2.1mm with positive core polarity, DC supplies are required to supply at least 500mA at 12vdc. The relays are SPCO (Single Pole Change Over) types.

    The normally open, normally closed and common pins are all available on the screw terminals.

    The ETH008 provides a red LED mounted immediately next to each relay to indicate whether it is in a powered state (LED on), there is also two LED's mounted in the Ethernet connector which will flash with Ethernet traffic. Finally there is a green power LED just above the processor.

    Relay Rating

     
     load type   Typical applications   Rating  Max DC load capacity

    Ethernet Controlled 8 Channel Relay 16A - DFRobot

     AC1  Non inductive or
     slightly inductive loads 
     16A @ 250V AC 
     AC15  Control of 
     electromagnetic load 
     (>72VA)
     3A @ 120V AC  
     1.5A @ 240V AC 
     AC3  Control of motor   750W
     DC1  Non inductive or
     slightly inductive loads
     16A @ 24V DC 
     DC13  Control of electromagnetic 
     loads
     0.22A @ 120V DC
     0.1A @ 250V DC


    Features

  • Controlled over Ethernet using simple TCP/IP commands.
  • Relays - 8
  • Power - 12V DC adaptor, supplied separately.
  • Configuration & Test interface - HTTP (webpage).
  • Control interface - TCP/IP over Ethernet.
  • Relay current - Up to 16Amp @24vdc or 250vac
  • Connections - Screw Terminals for N/O N/C and Common contacts.
  • Free Android and iPhone Apps are available to remotely control this module.
  • Please note additional options such as power supply, case and cables are available separately.
  • Specification

    • Power Supply:12V@1A
    • Relay: 8
    • Interface: RJ45
    • Protocol: HTTP or TCP/IP over Ethernet
    • Relay current:16Amp @24VDC/250VDC
    • Dimension: 133*74mm/ 5.23*2.91 inches

    Shipping List

    • Ethernet Controlled 8 Channel Relay 16A (ETH008) x1

    Relaterede varer