Aluminum Alloy Passive Cooling Case for LattePanda 2 Alpha & Delta (NOT Compatible with LattePanda 3 Delta 864)
På fjernlager Bestil før Onsdag kl 20 og varen afsendes ugen efter
Køb flere og spar:
Fri fragt ved køb over 999 kr
Til pakkeshop i DK Læs mere.
60 dages returret
Se venligst Handelsbetingelser Læs mere.
Danmarks største udvalg
Over 4000 produktnumre Læs mere.
ProjectsProject 1. Review and Test - Aluminium Alloy Armour case for LattePanda Alpha
Introduction: This video takes a look at the Aluminium Alloy Armour Case itself, show the installation procedure then test the thermal performance when compared to the stock cooler.
LattePanda Delta Projects Overview2022-05-30 16:51:29
Note: This Aluminum Alloy Passive Cooling Case is not compatible with LattePanda 3 Delta 864, please wait for the Official LattePanda 3 Delta 864 Enclosure.
This aluminum alloy heat sink is designed for LattePanda 2 Alpha and 2 Delta Edition. While perfectly protecting the motherboard, the case reserves all peripheral interfaces and GPIO of LattePanda, which allows you to DIY projects of all kinds as much as you like. The aluminum alloy case has good thermal conductivity, and can also be accompanied by high-quality Shintsu X2379215CPU silicone grease and copper heatsink to make the heat dissipation effect more remarkable.”
Four external fan holes are reserved on the housing, so you can conveniently add a fan on it, such as 4010, and 4012 fans. (Recommended Fan Dimension: 40 x 40mm with 32 ±0.3mm hole, M3 screws)
1. Please remove the pre-installed cooling fan on LattePanda Alpha or Delta when using the Aluminum Alloy Case.
2. For your safety, please DO NOT touch the case directly during use to prevent burns.
3. It is normal that the copper heatsink goes black after being used for a long time; Those who mind can polish it with sandpaper.
- Passive cooling aluminum alloy case with good heat dissipation
- All ports and GPIO reserved, perfect fit for LattePanda 2 Alpha & 2 Delta
- Four fan holes are reserved in the upper cover; fans with a 400mm side length; the center distance of the holes is 32 mm
- With high-quality silicone grease and copper heatsink, we provide you with the perfect heat dissipation scheme.
- Reinforced aluminum material, lightweight and durable
- Easy to install
- Ultra-thin design
- Material: Aluminum Alloy
- Size: 11.5x7.8x1.8cm /4.53x3.07x0.71 inch
- Compatible with: LattePanda 2 Alpha & LattePanda 2 Delta
- Aluminum Alloy Case for LattePanda Board x1
- Copper heatsink (15*15mm) x1
- 1g Thermal grease silicone x1