Spring til hovedindhold (tryk på Enter)

DFRobot

Varenr. DFR0665

Fermion: 2.8” 320x240 TFT LCD Resistive Touchscreen with MicroSD Card Slot (Breakout)

365,00
DKK

På fjernlager Bestil før Onsdag kl 20 og varen afsendes ugen efter

Køb flere og spar:

365,00 DKK pr. stk. -
338,00 DKK pr. stk.
Spar 7%
310,00 DKK pr. stk.
Spar 15%

This item is only sold in badges of .

eller

Du skal vælge en variant.
Minimumsmængde nået.
Maksimal mængde nået
  • Fri fragt ved køb over 999 kr

    Til pakkeshop i DK Læs mere.

  • 60 dages returret

    Se venligst Handelsbetingelser Læs mere.

  • Danmarks største udvalg

    Over 4000 produktnumre Læs mere.

Documents

  • Product Wiki
  • Introduction

    With 320x240 color pixels, this 2.8” LCD display module adopts the ILI9341 driver chip and integrates XPT2046 that supports resistive touch. The display module adopts SPI(4-line) communication mode, performing excellently in the angle of view(60/60/60/60). It also supports the GDI interface (the GDI interface should be used in conjunction with the main control board with GDI interface). Just plug it in, and you’re good to go. The module, featuring high resolution, wide view angle, and simple wiring, can be applied in many display applications: sensor monitoring and warning, controller display, flash or 3D displays, Touch interface, etc.

    The 2.8” LCD display module can be operated at 3.3V~5V, and is compatible with multiple main-controllers: UNO, Leonardo, ESP32, ESP8266, FireBeetle M0, etc. Use the GDI interface to work with M0, which could effectively reduce wiring steps. Besides, there is an onboard MicroSD card slot for displaying more pictures.

    Note: The product doesn’t contain a MicroSD Card. You can click here to buy one.

    Features

    • Wide-angle of view
    • Resistive Touchscreen 
    • High Resolution 
    • GDI Interface, plug, and play
    • Onboard MicroSD Card Slot

    Specification

    • Operating Voltage: 3.3V-5.5V
    • Display Color: 16-bit Color Depth (RGB565)
    • Driver Chip: ILI9341
    • Touch Chip: XPT2046
    • Pixel: 320x240
    • Communication Mode: SPI
    • Brightness (cd/m2): 300(TYP)
    • Full-screen Consumption: 43.5mA*5V/3.3V 
    • Operating Temperature: -10℃~+60℃
    • Display Area: 57.60x43.20mm/2.27x1.70”
    • Module Dimension: 80.00x50.00mm/3.15x1.97”
    • Mounting Hole Diameter: 2mm

    Shipping List

  • 2.8”320x240 TFT LCD Touchscreen with MicroSD x1
  • 2.54-12P Black Single Row Pin Header x1
  • FPC0.5-18PIN 10cm Reverse Connection Line x1
  • Relaterede varer