Spring til hovedindhold (tryk på Enter)


Varenr. DFR0591

2.13Inch e-ink Display Module for Raspberry Pi 4B/3B+/Zero W


På fjernlager Bestil før Onsdag kl 20 og varen afsendes ugen efter

Køb flere og spar:

340,00 DKK pr. stk. -
313,00 DKK pr. stk.
Spar 8%
285,00 DKK pr. stk.
Spar 16%

This item is only sold in badges of .


Du skal vælge en variant.
Minimumsmængde nået.
Maksimal mængde nået
  • Fri fragt ved køb over 999 kr

    Til pakkeshop i DK Læs mere.

  • 60 dages returret

    Se venligst Handelsbetingelser Læs mere.

  • Danmarks største udvalg

    Over 4000 produktnumre Læs mere.


  • Product wiki
  • Introduction

    This Raspberry Pi e-ink display module comes with a 2.13" screen with a resolution of 250×122, adopting SPI interface to communicate with Raspberry Pi. It leads out the pins on Raspberry Pi, so there would be no conflicts if you need to use the e-ink display and Raspberry Pi’s pins at the same time. The display supports custom font. There are two patch touch switches on the module for expanding more applications. This e-ink display features small size, compact layout, plug and play, and low power consumption. It can provide clear display even in sunlight. When powered off, the e-ink display will continue to display the last screen. Since it will take a long time for the display to refresh fully, we don’t recommend using the product in the application that needs frequent refreshing to display data.


    • Operating Voltage: 3.3V
    • Resolution: 250 x 122
    • Interface Type: SPI
    • Color: black, white
    • Refresh Way: fully or partially refresh
    • Refresh Time: 3s for full refresh, 680ms for partial refresh
    • Refresh Power: 26.4mW(typ.)
    • Standby Power: 0.017mW
    • Visual Angle: >170°
    • Connector: 2.54mm 2*20pin
    • Dimension: 66.5 x 31 mm/2.62x1.22”
    • Storage Temp: -20℃~+60℃

    Shipping List

    • Raspberry Pi e-ink Display Module x1
    • Double Nuts Copper x2
    • Screw x4

    Relaterede varer