Spring til hovedindhold (tryk på Enter)


Varenr. DFR0835

4.7Inch E-ink Screen for ESP32


På fjernlager Bestil før Onsdag kl 20 og varen afsendes ugen efter

Køb flere og spar:

683,75 DKK pr. stk. -
659,00 DKK pr. stk.
Spar 4%
635,00 DKK pr. stk.
Spar 7%

This item is only sold in badges of .


Du skal vælge en variant.
Minimumsmængde nået.
Maksimal mængde nået
  • Fri fragt ved køb over 999 kr

    Til pakkeshop i DK Læs mere.

  • 60 dages returret

    Se venligst Handelsbetingelser Læs mere.

  • Danmarks største udvalg

    Over 4000 produktnumre Læs mere.


  • Product wiki
  • Introduction

    Integrated with the ESP32-D0WD, this 540*960 4.7" E-ink display comes with 16MB Flash and 8MB PSRAM, which can work well with other touch screens. It supports 16 grayscale levels and partial refresh. Compared with a regular LCD, E-ink displays are easier on the eyes, which makes them a good choice for reading or viewing for longer periods. Meanwhile, E-ink screens are low power consumption and have the ability to retain the image even if power to the display is terminated.

    A 6pin touch screen interface is reserved as an optional accessory to facilitate your application. There are 5 buttons on the side: 3 of them are custom buttons, which can define functions flexibly; and one of them is the reset button. It also reserves 7 expansion IO ports for connecting other devices. Its back is designed with a PH 2.0 pitch 3.7V battery connector.




  • Controller: ESP32-WROVER-E (ESP32-D0WDQ6 V3)
  • Flash: 16MB
  • PSRAM: 8MB
  • Resolution: 540(H)×960(V)
  • Display Grayscale Level: 16 levels
  • Custom Buttons: 3
  • IO Port: 7
  • Battery Connector: PH 2.0 interface
  • Battery Charge and Discharge Protection Chip: HX6610S
  • Display Size: 4.7 inches
  • Partial Refresh: support
  • Touch Screen Interface: 6pin touch screen interface
  • Shipping List

  • E-ink Screen 4.7" x1
  • USB to Type-C Data Cable (30CM) x1
  • Power Cable x1
  • Relaterede varer